Vertiv Liebert LVC - Mounting Base Dimensions

Vertiv | Liebert LVC | User Manual 4
Product Overview
1.3.2. Mounting Base Dimensions
The mounting base is shown in Figure 1-3, and the specic mounting base dimensions of each model are
listed in Table 1-3.
Figure 1-3 Mounting Base Figure
Table 1-3 Mounting base dimensions (unit: mm/inch)
Model L W D d
LVC088 2330/91.7” 1100/43.3” 60/2.4” 80/3.2”
LVC106 2330/91.7” 1100/43.3” 60/2.4” 80/3.2”
LVC140 2330/91.7” 1250/49.2” 60/2.4” 80/3.2”
LVC152 2330/91.7” 1250/49.2” 60/2.4” 80/3.2”
LVC170 2330/91.7” 1250/49.2” 60/2.4” 80/3.2”
• It is recommended to use M12 x 4 bolts to x the mounng base to the round holes at the instal-
laon site.
• It is recommended to use rubber cushions between mounng foot and the installed base to ab-
sorb vibraon.