Vertiv | Liebert LVC | User Manual 10
Installation
Figure 1-6 Front-and-Back Side by Side Installation Layout Overhead View
Figure 1-7 Front-and-Back Side by Side Installation Layout Left View
1.3. Space Requirements
• A 4000mm clearance is required around the condenser air outlet.
• At least 1250mm service space is required on one side of the condenser.
• The engineered mounting bracket requires four sides to be hollowed out, which can be ventilated freely.
In the following Figure 2-8 & 2-9. “h” is engineered mounted bracket height “h1” is enclosure height, “a” is the
To Next Page
Loading...
