S600D
3
Special Declaration
Safety of Personnel
1.
This product must be installed by qualified professionals, engineers appointed by the manufacturer or an
authorized agent. Failure to observe this condition may result in product malfunction, and compromise the safety of
personnel.
2.
Take the time to read this product manual and the safety precautions thoroughly before installing and
commissioning this product. Failure to observe this condition may result in product malfunction, and compromise
the safety of personnel.
3.
This product is not intended for use with life support systems
4.
Never attempt to dispose of the internal and external batteries in fire as they may explode, leading to serious
injuries, or even death.
Product Safety
1.
If the product is to be stored or unused for extended periods, place the equipment in a clean, dry environment
within the specified temperature range
2.
This product should be used in an appropriate operating environment. Consult the Site Preparation section for
information about the ideal operating and maintenance environment for this product
3.
This product is not designed for use in conditions and/or environments where:
⚫
The temperature and relative humidity are outside the specified limits
⚫
It is subject to vibration or shocks
⚫
It is exposed to the presence of conductive dust, corrosive gases, salts, or inflammable gases
⚫
It is exposed to heat sources or strong electro-magnetic interference
Disclaimer
VERTIV may not be held accountable or responsible for defects and malfunctions arising for the following reasons:
⚫
Application range or operating environment outside the specified limits
⚫
Unauthorized modification, incorrect installation or operation
⚫
Force majeure
⚫
Other actions not in compliance with the instructions in this manual
To Next Page