Need help?Do you have a question about the Vertiv Liebert S600E and is the answer not in the manual?
General| Model | Liebert S600E |
|---|---|
| Product Type | UPS |
| Brand | Vertiv |
| Power Rating | 600 kVA |
| Capacity | 600 kVA |
| Frequency | 50/60 Hz |
| Topology | Double Conversion Online |
| Category | Uninterruptible Power Supply |
| Efficiency | Up to 95% |
| Battery Type | Lead-acid |
| Communication Interface | USB, RS-232, SNMP |
| Operating Temperature | 0 to 40 °C |
| Humidity | 0 to 95% non-condensing |
Overview of UPS capabilities and its internal AC-DC-AC conversion architecture.
Details the different operational modes like Normal, Battery, Bypass, ECO, etc.
Covers charging, End-of-Discharge protection, and temperature compensation.
Guidelines for positioning, cabling, and handling the UPS equipment safely.
Specifies conditions for UPS location, ventilation, and ambient temperature.
Details on moving the cabinet, required clearance, and cable access.
Guidance on selecting and connecting UPS input, output, and battery cables.
Information on connecting communication ports like RS232, USB, and Intellislot.
Covers protective earth connection and external circuit breakers.
Overview of LCD screen, keys, and LED indicators on the UPS panel.
Describes navigation through menus, flow screen, and main menu.
Lists and explains various alarm messages and their meanings.
Step-by-step guide for safely powering on the UPS system.
Procedures for switching between Normal, Battery, and Bypass modes.
Instructions for completely powering down the UPS.
Critical safety guidelines for working with UPS batteries.
Information on valve-regulated batteries, capacity, and maintenance.
Details on BCB selection and protection features for batteries.
Steps for installing multiple UPS modules in parallel.
Guidelines for starting, operating, and isolating UPS modules in a parallel setup.
Setup and synchronization of Load Bus Synchronizer (LBS) systems.
Catalog of optional accessories for the UPS system.
Guide for installing the network management card for remote monitoring.
Instructions for installing the relay card for dry contact monitoring.
Procedures for maintaining battery health and longevity.
Routine checks for operational status and functional integrity of the UPS.
Lists compliance with relevant European and international standards.
Details operating environment, dimensions, and weight.
Covers input, output, and bypass electrical parameters.
To Next Page