NetSure
™
Control Unit (NCU)
User Manual, UM1M830BNA
Spec. No: 1M830BNA, 1M830DNA Code: UM1M830BNA
Model No: M830B, M830D Revision M, May 12, 2017
CANCEL-USER
(CANC-USER)
Referenced In: TR-NWT-000835, Issue 3; pg. 3-33
General Description: This command is for terminating a User session [i.e., logging off of the NE (NCU)].
NCU Access Level: any access level
Input Format:
CANC-USER:[<tid>]:<aid>:<ctag>;
<aid>
For this command, the access identifier is the User identifier(<uid>). Invalid values received for this parameter return an
error response with the error code IIAC.
Normal Response Format:
No response is returned if a valid User session has not been established. Otherwise the response is in the following format.
cr lf lf
^^^<source identifier>^<date>^<time> cr lf
M^^<ctag>^COMPLD cr lf
To Next Page
Loading...
