NetSure
™
Control Unit (NCU)
User Manual, UM1M830BNA
Spec. No: 1M830BNA, 1M830DNA Code: UM1M830BNA
Model No: M830B, M830D Revision M, May 12, 2017
TL1 AUTONOMOUS MESSAGES SUPPORTED (IN ALPHABETICAL ORDER)
This section lists the specific autonomous messages (in alphabetical order) the NCU supports. A brief description of each is provided.
NOTE: In autonomous messages, the fractional portion of the ATAG is not supported.
CANCEL SESSION
(TIMEOUT)
Referenced In: TR-TSY-000835, Issue 2; pg. 12.5-13
General Description: This is an automatic message transmitted by the NE (NCU) when an established session is terminated because of a
"timeout", i.e., no messages were exchanged for an interval equal the controller session timeout setting.
Message Format:
cr lf lf
^^^<sid>^<YY-MM-DD>^<HH:MM:SS> cr lf
A^^<atag>^CANC cr lf
<uid> cr lf ;
<uid>
This is the User whose session is terminated as a result of the timeout.
To Next Page
Loading...
