Vertiv M830D - Page 55

NetSure
™
Control Unit (NCU)
User Manual, UM1M830BNA
Spec. No: 1M830BNA, 1M830DNA Code: UM1M830BNA
Model No: M830B, M830D Revision M, May 12, 2017
[45]
Table 5
Alarm Name
Alarm Description
Action to Correct
IB2-1 Temp2 High 2
Temperature sensor #2 (connected to IB2-1
board and set as Ambient) sensing
temperature higher than high temperature
threshold 2.
Check why temperature is high or low.
IB2-1 Temp2 High 1
Temperature sensor #2 (connected to IB2-1
board and set as Ambient) sensing
temperature higher than high temperature
threshold 1.
IB2-1 Temp2 Low
Temperature sensor #2 (connected to IB2-1
board and set as Ambient) sensing
temperature lower than low temperature
threshold.
EIB-1 Temp1 High 2
Temperature sensor #1 (connected to EIB-1
board and set as Ambient) sensing
temperature higher than high temperature
threshold 2.
Check why temperature is high or low.
EIB-1 Temp1 High 1
Temperature sensor #1 (connected to EIB-1
board and set as Ambient) sensing
temperature higher than high temperature
threshold 1.
EIB-1 Temp1 Low
Temperature sensor #1 (connected to EIB-1
board and set as Ambient) sensing
temperature lower than low temperature
threshold.
EIB-1 Temp2 High 2
Temperature sensor #2 (connected to EIB-1
board and set as Ambient) sensing
temperature higher than high temperature
threshold 2.
Check why temperature is high or low.
EIB-1 Temp2 High 1
Temperature sensor #2 (connected to EIB-1
board and set as Ambient) sensing
temperature higher than high temperature
threshold 1.
EIB-1 Temp2 Low
Temperature sensor #2 (connected to EIB-1
board and set as Ambient) sensing
temperature lower than low temperature
threshold.
SMTemp1 Temp1 High 2
Temperature sensor #1 (connected to SM-
Temp 1 and set as Ambient) sensing
temperature higher than high temperature
threshold 2.
Check why temperature is high or low.
SMTemp1 Temp1 High 1
Temperature sensor #1 (connected to SM-
Temp 1 and set as Ambient) sensing
temperature higher than high temperature
threshold 1.
SMTemp1 Temp1 Low
Temperature sensor #1 (connected to SM-
Temp 1 and set as Ambient) sensing
temperature lower than low temperature
threshold.
…
…
…