Commissioning Guide VESDA-E VEA
32407_01 iii
Scope
The VESDA-E VEA Commissioning Guide outlines the commissioning process for the VESDA-E VEA detector.
It will guide you through the commission process and the completion of commissioning documentation. The
guide also provides information on the approval and handover of commissioned VESDA-E VEA detectors.
The Commissioning Guide helps with the commissioning and management of the VESDA-E VEA detector.
This guide assumes that you have attended accredited VESDA training on commissioning and are
knowledgeable about the VESDA product range. This guide also assumes that you have an understanding of
the various aspects of an aspirating smoke detection system and are fully aware of the local codes and
standards.
To commission the VESDA-E VEA detector, you must have the necessary certification issued by Xtralis or an
authorized distributor. Commissioning before you receive the appropriate training may void the warranty.
To Next Page
Loading...
