Vespa LX 50 4T User Manual

03_11
NGK CR 8EB
03_12
03_13
Removing the air filter (03_12, 03_13)
Remove the side fairing unscrewing the 2 screws marked A. Remove the air cleaner
cap «D» after unscrewing the 6 fixing screws «C», then remove the filtering element.
Clean with water and shampoo, afterwards dry with compressed air and submerge in
a recommended oil and petrol mixture in ratio of 50%. Afterwards squeeze it, leave it
to dry and mount it again.
CAUTION
IN CASE OF RIDING ON DUSTY ROADS IT IS ADVISABLE TO CLEAN THE AIR
FILTER MORE FREQUENTLY THAN INDICATED IN THE RELEVANT CHAPTER
ON SCHEDULED MAINTENANCE.
31
3 Maintenance

Vespa LX 50 4T Specifications

General

Engine Type	Single-cylinder, 4-stroke
Displacement	49.9 cc
Cooling System	Air-cooled
Fuel System	Carburetor
Front Brake	200 mm disc
Rear Brake	110 mm drum
Front Tire	110/70 - 11"
Rear Tire	120/70 - 10"
Height	1, 140 mm
Transmission	Automatic
Fuel Tank Capacity	7 liters
Seat Height	785 mm
Dry Weight	96 kg
Max Power	4.35 hp @ 8, 250 rpm
Length	1, 770 mm
Width	705 mm
Front Suspension	Single arm with helical spring and hydraulic shock absorber