PLASTIC SURFACES, TO PREVENT THEM LOSING THEIR SHINE AND ME-
CHANICAL CHARACTERISTICS.
WARNING
WHEN WASHING THE ENGINE WITH A HIGH-PRESSURE WATER JET:
• ONLY USE FAN SPRAY JETS.
• DO NOT PLACE THE WATER JET NOZZLE CLOSER THAN 60 CM.
• DO NOT USE WATER AT TEMPERATURES OVER 40° C.
• DO NOT DIRECT THE JETS DIRECTLY TO CARBURETTOR, WIRING, SLOT
DIFFUSER ON THE TRANSMISSION COVER AND SCROLL COVER.
DIFFICULTY STARTING
No fuel in tank Refuelling
Filters, jets or carburettor dirty or
clogged.
Contact an Authorised Service
Centre.
Insufficient battery charge Kick-start. Recharge the battery.
IGNITION PROBLEMS
No spark from spark plug. Due to
the presence of high voltage, this
check should only be carried out by
an expert.
Check that the electrodes are
properly adjusted (0.7÷ 0.8 mm).
Check that the electrodes are
clean (clean with pure petrol and
metal brush or with emery cloth).
Check the spark plug insulator: if
46
To Next Page
Loading...
Need help?
General