ADJUST THE MACHINE CONFIGURATION.
In the Parameter Settings submenu, select Computer Configuration to
display the left interface:
Select and adjust parameters by pressing the arrows. When you're done
adjusting, move the cursor to Write and press ENT to save the parameter
changes, or press ESC to exit without saving. Reading can load saved
parameters.
ADJUST THE PARAMETERS OF THE AXIS OF ROTATION.
In the Parameter Settings submenu, select Rotation Function Settings to
display the left interface:
Select and adjust parameters by pressing the arrows. When you're done
adjusting, move the cursor to Write and press ENT to save the parameter
changes, or press ESC to exit without saving. Reading can load saved
parameters.
To Next Page
Loading...
