Note
If water is left in the machine in an
environment below 0°C, it may cause serious
damage to the machine parts. This fault is not
covered by warranty
Special protection measures are
required if the ice maker is out of service for
a long period of time or exposed to an
environment of 0°C or less. Follow these
steps below:
Disconnect the power to the ice maker.
Disconnect the water supply to the ice
maker.
Empty the sink.
Remove water inlet hose and drain it
from the water inlet.
Ensure that there is no water residue in
the inlet, drain and distribution pipes.
16. Maintenance
Before applying for repair, please consider the
following aspects in order to quickly identify and
improve the efficiency of machine recovery.
a). Whether the water supply is normally,
including faucets open, inlet valve not blocked,
and water pressure is in 1bar~5bar.
b). Whether the power supply is normal,
including voltage is in ±10% of rated
voltage, power switch is connected, the fuse
is not burnt out and whether the plug is
fixed well.
c). Whether the ambient temperature is too
high or too low (the operating temperature range
of the ice maker is 10°C～38°C), whether the
water temperature is too high or too low (the
water temperature range is 5°C～32°C).
d). Whether the ice bin is full of ice and can
work after ice take away.
.
Write down the number of the
machine and call the toll-free phone
number labeled with the service label
or your service provider.
To Next Page
Loading...
