forty-five minutes, and the machine will start again.
DAILY CLEANING AND MAINTENANCE
Clearance of side panels and inner container
A、Before cleaning and sanitizing the ice maker, clean up the
ice blocks in the cabinet and ensure the power source and
water source has been cut off.
B、Cleaning the side panels and inner container with clean
water (you can join some neutral detergent in water), and
then wipe the machine with a soft towel.
Attention：Do not spray water to machine
directly. Alkaline detergent, perfumed soap,
lapping powder, boiling water, bananas oil,
tolperison and most of the other organic
solvents can’t be used to clean the machine.
2. Dust removal of the condensor
To use the machine well, please clean the dust covering the
condenser's fins once every three months. Open the
ventilation fence in front of the machine (grasp the frame of the
ventilation fence by hand, pull it out carefully), and use a dust
collector or brush to clean the dust. Sharp iron tools must not
be used to clean the condenser and must not damage the
radiating fins.
To Next Page
Loading...
