62
Operation
Turning at headlands
Turning at the field headland is performed as follows:
> Activate and hold the handle for the tractor's hydraulic outlet.
• Raise the cutting unit.
> Release the handle for the tractor's hydraulic outlet.
> Turn at the field's headland.
NB
On tractors with large front wheels and short lift arms on the front lift,
users must be particularly aware of the danger of the wheel coming
into contact with the deflector plates when the front wheel is turning,
for example when turning at the headland. This can damage or deform
the deflector plates.
»Pay attention to the deflector plates« page 56
> Activate and hold the handle for the tractor's hydraulic outlet.
• Lower the cutting unit.
> Release the handle for the tractor's hydraulic outlet.
To Next Page
Loading...
