Operation
61
Adjusting the stubble
height
The stubble height is adjusted as follows:
• Reducing the length of the top link increases the stubble height.
• Extending the top link reduces the stubble height.
Machine start-up
> Carefully connect the tractor's PTO outlet.
> Carefully increase the speed of the PTO outlet to 1000 RPM.
> Select a suitable speed on the tractor.
> Use the tractor's hydraulic outlet to operate the machine's
hydraulic functions.
NB
In case there is no function on the machine:
> Stop the tractor’s forward drive.
> Disconnect the P.T.O. shaft immediately.
> Disconnect the hydraulic system of the tractor immediately.
> Stop the tractor.
NB
If the machine is too noisy or vibrates too much, stop the machine
immediately.
»Troubleshooting« page 119
To Next Page
Loading...
