84
Maintenance
Cones
Safety concerning maintenance work on the cutterbar
When working on the cutterbar, the tractor must be stopped and
secured.
This prevents the machine from suddenly starting to rotate.
If the tractor and the PTO shaft have not been connected according to
the instructions serious accidents resulting in torn off limbs can occur.
When working on the cutterbar:
• The tractor engine must be stopped.
• The ignition key must be removed.
• The PTO shaft must be disconnected.
• The tractor hydraulic system should be disconnected.
• The hand brake should be activated.
Check the machine's cones regularly for dirt
The machine's cones must be regularly inspected.
Dirty cones can cause imbalance in the rotating parts.
Vibrations can cause damage on the machine.
External inspection
Every day
»Maintenance intervals« page 72
An external inspection is carried out as follows:
> Open the first guard.
To Next Page
Loading...
