Maintenance
100
CR model
The oil level is checked as follows:
Remove the dipstick.
Check that the oil level is up to the “max” indication on the dipstick.
The oil level on the main gear must always be between “min.” and
“max.” as shown on the dipstick.
When topping up, do the following:
Pour the oil through the hole where the dipstick is fitted.
Fit the dipstick onto the transmission, then remove it again.
Check that the oil level is up to the “max” indication on the dipstick.
Repeat the procedure until the correct oil level is reached.
»Lubricants« Page 177
To Next Page
Loading...
