Vicon Extra 832R PRO - Page 136

Maintenance
136
If the cutterbar is not horizontal, carry out the following:
 Raise or lower the tractor's lift arms until the cutterbar is horizontal.
 Remove the oilplug.
 Fill up with the new oil until the oil level is as shown.
• Min. 6 mm (
1
/
4
’’)
• Max. 9 mm (
3
/
8
’’)
 »Lubricants« Page 177
 Fit the oilplug and tighten it fully.
 Open the mechanical safety valve.
Model: Litre
(approx.)
Pints (US)
(approx.)
Pints (Imp.)
(approx.)
832R-CR Pro 4.1 8.6 7.2
835R Pro 4.6 9.7 8.1
Valve