Maintenance
144
Rollers
Pay attention when carrying out oil change
Use barrier cream or protective gloves when changing oil.
It will protect your hands against skin injuries.
Direct contact with the oil could lead to serious skin injuries.
Use the correct oil type
Always use the correct oil type for the transmission.
This will ensure the transmission has a long service life.
Using the incorrect oil type may damage the transmission.
Maintain correct oil level
The maximum and minimum oil level indication on the transmission
must not be exceeded.
Correct transmission oil level will ensure a long service life.
Incorrect oil levels can cause the transmission to overheat, resulting
in serious damage.
Changing oil
»Maintenance intervals« Page 84
Main gear
After 10 hours of use
Thereafter, every season
Oil amount when changing oil:
Replace the oil as follows:
Remove oilplug 2.
Let the oil flow into a suitable container.
Allow the last of the oil to drip out of the cutterbar for approx. 10 -
15 minutes.
Fit oilplug 2 and tighten it.
Remove oilplug 1.
Fill the oil through the hole for oilplug 1.
• The correct oil level is reached when the oil reaches the edge of
the hole for oilplug 1.
Fit oilplug 1 and tighten it.
»Oil for the cutterbar« Page 177
»Maintenance intervals« Page 84
Litre
(approx.)
Pints (US)
(approx.)
Pints (Imp.)
(approx.)
0.8 1.7 1.4
To Next Page
Loading...
