Maintenance
145
Arm
After 10 hours of use
Thereafter, every season
Oil amount when changing oil:
Replace the oil as follows:
Remove oilplug 4.
Let the oil flow into a suitable container.
Allow the last of the oil to drip out of the cutterbar for approx. 10 -
15 minutes.
Fit oilplug 4 and tighten it.
Remove oilplug 3.
Fill the oil through the hole for oilplug 3.
• The correct oil level is reached when the oil reaches the edge of
the hole for oilplug 3.
»Oil for the cutterbar« Page 177
»Maintenance intervals« Page 84
Litre
(approx.)
Pints (US)
(approx.)
Pints (Imp.)
(approx.)
0.75 1.6 1.3
To Next Page
Loading...
