Vicon Extra 832R PRO - Page 68

Operation
68
Stubble height
The machine has variable settings for stubble height.
Stubble height is adjusted in the following way:
 Turn the left handle.
• When the handle is turned clockwise, stubble height is reduced .
• When the handle is turned anti clockwise, stubble height is
increased.
The stubble height can be combined with fitting high skids* which can
be used to set the stubble height as follows:
* Extra equipment
 »Extra equipment« Page 167
Handle
Stubble height Note
20-50 mm (
3
/
4
’’-2’’)
No skids fitted
35-85 mm (1
3
/
8
’’-3
3
/
8
’’) 20 mm (
3
/
4
’’) skids* fitted
50-110 mm (2’’-4
5
/
16
’’) 40 mm (1
9
/
16
’’) skids* fitted
100 mm (4’’) or more
80 mm (3
1
/
8
’’) skids* fitted