Victron energy BlueSolar PWM Series - Product General Information; Product Features; Installation Guide

1
EN NL FR DE ES SV IT Appendix
1. General Information
The BlueSolar PWM Charge Controller series uses Pulse Width Modulation (PWM)
charge voltage control combined with a multistage charge control algorithm.
2. Features
• Three stage battery charging [bulk – absorption – float]
• Battery type: Lead-acid and LiFePO4 (with internal BMS)
• Protected against over current.
• Protected against short circuit.
• Protected against reverse polarity connection of the solar panels and/or battery.
• Low voltage load disconnect.
• Temperature protection.
3. Installation
Important note: always connect the batteries first.
IMPORTANT
• Always connect the battery first, in order to allow the Controller
to recognize system voltage
• Use a 12V (36 cells) solar array for a 12V system.
• Use a 24V (72 cells) solar array for a 24V system.