66250203 - V4.4 - 15/05/22
- 6 -
4000 Series Vandal Resistant Range
Art.4212 - Installation instructions
SETTING QUICK CALL USER
• enter programming mode as Master (see "How to insert a code" on pag. 3);
• from the main programming (Fig. 8), press “1” to enter the user menu;
• then press “3” for the scrolling user menu (the current quick call shows the
icon after the name);
• User the scroll keys and then press to select the user. The message “ITEM SAVED” will appear if the parameter is correctly saved.
DELETING QUICK CALL USER
• enter programming mode as Master;
• from the main Programming menu (Fig. 8), press “1” to enter the user menu;
• then press “4” to delete the parameter from the memory. The message “ITEM DELETED” will appear if the parameter is correctly
removed.
KEY MANAGING
From Programming menu:
• from the main menu press “1” to enter the user menu;
• select user searching by name or at;
• Press “8” to enter user tag menu;
HOW TO ADD A KEY
• press “3” to add a key: the dislpay will show “INSERT KEY” as shown in Fig. 9
• pass the key over the
symbol;
• if key is not already in memory display will show “ITEM SAVED”, or “ALREADY IN
MEMORY” with corresponding acoustic signals.
NOTE: when security mode is Code + Fob it is not possible to add a fob in this way. It
must be added with a code in the code menu..
HOW TO MODIFY A KEY
• press “1” to enter the User Tag Search menu;
• press “1” to search by number or “2” to search by key;
» if user has previously select search by number option, he has to enter the key number;
» if user has previously select search by key option, he has to pass card/fob over the
symbol;
• if searched key is present, the user tag modify page will appear: pressing “1” to enable/disable the key;
• press to save or to exit without saving.
If searched key isn’t present in memory, panel will show “NOT FOUND!”.
HOW TO DELETE A KEY
• press “2” to enter the User Tag Delete menu;
• press “1” to delete single key or “2” to delete all keys linked with selected users;
» if user has previously select “All”, all keys associated with that user will be deleted, “DELETED MESSAGE” will appear;
» if user has previously select “Single” a search will be needed to locate the key:
› press “1” to search by number or “2” to search by key;
– if user has previously selected search by number, the key number must be entered;
– if user has previously selected search by key, pass the card/fob over the
symbol.
› if searched key is present, panel will show ” ITEM SAVED” message;
› if searched key isn’t present in memory, panel will show “NOT FOUND!”.
to exit
Insert key
Fig. 9
Art.4212 Audio/video digital front panel Programming
To Next Page
Loading...
Need help?
General
