To Next Page

To Previous Page

66251435-EN - V1.1 - 15/10/16

VX2200 Digital System “6 Wire” BUS Video - “2 Wire” BUS Audio

Art.CST2220 - Operating Instructions

Art.CST2220 VX2200 IP Concierge Station GUI instruction sheet

TO MANAGE AN ALARM CALL OR A BOOKING CALL

Fig. 31 Call from apartment - Alarm or Booking call

Fig. 32 Apartment call management

Fig. 33 Alarm call apartment ringing

Fig. 34 Alarm call apartment answer

Fig. 35 Alarm call redirect

Fig. 36 Alarm call redirected

To manage a call from an apartment (Fig. 31) because of an alarm or a booking call, the operator must tap on the call (Fig. 32) then

press the

button to manage it or the button to cancel it. If the cancelled call is a “booking call”, the indoor station, de-

pending on the model, cannot book another call immediately due to a timeout controlled by the apartment intercom.

If the operator press the

button the call is canceled while if the operator press the button, the concierge calls the apart-

ment: the display rst shows “...calling...” while ringing (Fig. 33) then shows “Speak!” (Fig. 34) once the apartment answers.

Duing the call (Fig. 33) or the conversation (Fig. 34), the operator, at any time, can close the call by pressing the

Close Call

button.

Once the apartment answers, the operator can forward the call to another apartment by pressing the

Intercom

button (Fig. 34).

Pressing the

Intercom

button (Fig. 35) presents a list of apartments to direct the call to, either elect from the list by tapping the line or

search by apartment number or name.

Once the call is redirected and the destination apartment is ringing or in conversation, the operator (Fig. 36) can close the conver-

sation by tapping on it and pressing the

button.

Videx VX2200 Instruction Sheet

Other manuals for Videx VX2200