Carousel Mate - Service Manual
Page 7
CarouselMate_sm-1300-01-Oct2014
Service: 1-866-821-2647
Oce: 1-800-210-0141
www.storevertical.com
MENARDS COUNTERS
The cable from PLC to Display may or may not have a pigtail (6 inch crossover cable) It is recommended
that if they don’t have one when ordering a display that they also order the crossover cable
(part # 406-0087) � The cable may or may not be needed�
The Durant counter was used on the Carousel Mate
before the PLC and Display This counter will be a 220 volt
Counter
The carousel Mate plugs in to the carousel and that is why
its 220v
Some older Menards stores still have a
Archer cutting machine
This cutter also used the Durant Counter
BUT this counter will be a 110v
This cutter plugs in to the wall and that
is why its only 110v
To Next Page
Loading...