EasyManua.ls Logo

Viessmann KOB PYROMAT DYN - Page 24

Viessmann KOB PYROMAT DYN
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 24 of 72 PYROMAT DYN45 - DYN85 Issue 1.0 5726 783
Screen
number
Parameters Factory setting
17
Start boiler when the system temperature drops
below target:
If the temperature of the selected storage
sensor drops below the system target
temperature, the firing up is started when
automatic mode has been selected.
Storage top
18
Storage with integrated utility water heater,
utility water minimum temperature:
Minimum utility water temperature for storage
with integrated utility water heater. Only display
if: Storage with integrated utility water heater -
YES (PYROMAT DYN maintenance).
50°C
20 Automatic start with external request:
Should the boiler be switched on or off via an
external potential-free contact?
No
21
Material withdrawal with air vent setting greater
than:
Material withdrawal via adjustable air vent
setting.
50%
23 Feed auger target heat-up cycle:
After completing filling process and ignition, the
feed auger starts with this duty cycle.
5%
24 Feed auger maximum:
Maximum feed auger duty cycle (feed target
value with deactivated O2 control).
60%
28 Automatic mode:
Operating hours/minutes PYROMAT DYN
automatic mode.
0
29 Manual mode:
Operating hours/minutes PYROMAT DYN
manual mode.
0
31 Date - Year:
Year setting.
Current
32 Date - Month:
Month setting.
Current
33 Date - Day:
Day setting.
Current
34 Date - Weekday:
Weekday setting.
Current

Table of Contents

Related product manuals