Page 54 of 72 PYROMAT DYN45 - DYN85 Issue 1.0 5726 783
7 Servicing, cleaning
7.1 Safety regulations
Danger of burning due to hot system parts and ash!
Warning!
1. Allow heating system to cool down.
2. You should touch the unit only at the handles and other identified parts.
3. Never touch the flue ducts or their mountings.
4. Use protective gloves.
5. Use the cleaning tool supplied for cleaning.
6. Never remove the ash box when system is running.
General hazard!
Serious injuries due to electric shock.
Danger!
1. Switch off the heating system the at main switch.
2. Secure heating system against being switched on again.
3. Maintain secure condition during all work.
4. Never clean electrical system components with high pressure or steam cleaners.
5. Clean electrical system components with a suitable vacuum cleaner.
Risk of crushing and being drawn due to automatic start of
heating system!
When the heating system is switched on the system controller controls all of the heating
system drives.
Warning!
1. Switch off the heating system the at main switch.
2. Secure heating system against being switched on again.
3. Never reach into the feed system.
General hazard!
Serious injuries due to untrained personnel.
Warning!
1. Only trained and experienced personnel may perform maintenance work on the
heating system.
2. Training personnel may only work on the heating system whilst under supervision.
Observe disposal regulations!
1. Observe the national regulations when disposing of any ancillary material, waste and
system parts.
To Next Page
Loading...
