Viessmann KOB PYROMAT DYN - Page 43

5726 783 PYROMAT DYN45 - DYN85 Issue 1.0 Page 43 of 72
Screen
number
Parameters Factory setting
03 Heating period 1, heating day:
Set day or days for which the switching times
are to be applied. The heating days are selected
with keys F1 (for Monday) to F7 (for Sunday).
One button press Æ day selected, one further
button press Æ day deselected.
L This setting is only available in timer
operating mode.
Mon to Sun
04 Heating period 1, start:
Start release of utility water heating.
L This setting is only available in timer
operating mode.
06:00
05 Heating period 1, end:
End release of utility water heating.
L This setting is only available in timer
operating mode.
22:00
06 - 23 Heating periods 2-7
Dependant on the number of heating periods
(figure number 2), comprising heating days,
start and end.
-
24 Utility water temperature:
Setting the desired utility water temperature.
60°C
Additional parameters
with ECO-B2
Screen
number
Parameters Factory setting
25
Set return temperature xx °C higher than the
utility water temperature.
Desired return flow target temperature:
Current boiler temperature plus the value set
here.
-