Viessmann Vitocal 252-A Series - Cleaning the DHW Cylinder

122
Note
The following information applies to outdoor units with
1 and 2 fans. The outdoor unit with 2 fans is shown as
an example.
C
B
A
2.
1.
Fig. 82
A
Apertures in the base plate
B
Condensate pan
C
Condensate drain
3. Clean the condensate pan and condensate drain.
Torque for the screws:
1.8 ±0.5 Nm
Cleaning the DHW cylinder
According to EN 806, a visual inspection and (if neces-
sary) cleaning must be carried out no later than
2 years after commissioning, and as required there-
after.
Commissioning, inspection, maintenance
Cleaning the condensate pan and condensate drain (cont.)
6222080