18
Heat pump/heating circuit settings
Changing switching times (cont.)
Heat pump timer
20:0020:14 0 3 6 9 12 15 18 21 24
MONDAY
RE
TUESDAY
RE
WEDNESDAY
RE
THURSDAY
RE
FRIDAY
RE
SATURDAY
RE
SUNDAY
RE
NORMAL
∧
DAY TEMPE
>>
SET>>
STANDA
BACK
Open the programming unit flap and
press the following keys:
11.
C
for "Programme".
12.
A
for "Heat pump"
or
11
C
for "Mixer 1".
13.
°
/
±
press until "Timer/
switching times" is
highlighted.
14.
>>>
press until the "Timer"
menu is shown.
15.
DAY
press until the
respective day of the
week or all weekdays
are highlighted
simultaneously.
16.
>>
press until the arrow is
positioned at the point
(time), from where the
operating mode should
be changed.
17.
TEMPE
press until the required
operating mode is
shown (see page15).
18.
SET>>
press for the period,
during which the
modified operating
mode should be active.
19. Proceed as described in items 6
to 8 for the setting of further
switching times.
10.
BACK
press to confirm.
Close the programming unit flap.
5592 415GB
To Next Page
Loading...
