Viessmann VITOCAL 300 - Changing Switching Times

17
Heat pump/heating circuit settings
Changing switching times
The central heating can be changed between operating modes according to
the switching time settings.
You can select identical switching times for all weekdays or individual ones
for every weekday.
When setting the switching times, take the response time of your heating
system into consideration. Select correspondingly earlier start−up and
switch−off times.
Key to graphics
0369121518212
4
  
Normal NO
Fixed
*1
FE
Reduced RE
OFF AU
The height of the bar and the
alphabetical abbreviation indicate
the respective operating mode
belonging to the displayed time.
*1
This is only shown if the control unit operates as fixed value regulator.
5592 415GB