Viessmann VITOCAL 300 - Your Heating System is Pre-set at the Factory

6
Quick start
Your heating system is pre−set at the factory
The control unit is preset at the factory for standard operation.
You may change the factory settings in accordance with personal
requirements.
Day of the week and time (CET)
These have been set up at the
factory and are retained by the
integral long−life battery.
The system automatically changes
over between summer and winter
time.
Heating program
This is set to winter operation, i.e.
central heating and DHW are
operated (if installed) in accordance
with the set switching times.
Switching times
The switch−on time is set to
06.00hrs., the switch−off time to
22.00hrs.
Central heating and DHW are
operated at a standard temperature
between 06.00 and 22.00 hrs.
Central heating is operated at a
reduced temperature, between 22.00
and 06.00 hrs.
In order to reset the factory settings,
open the flap, press "F" and follow
the instructions in the display screen.
Please note that this resets all
modified values to their factory
settings.
5592 415GB