Viessmann VITOCAL 300 - Scanning General and Fault Statistics

32
For information
Scanning general and fault statistics
In this menu, you can scan the following:
 hours run,
 average hours run by the compressors,
 number of activations,
 the last eight system fault messages.
Open the programming unit flap and
press the following keys:
Error signals [date]
A08: Control HP 14:09:02
A08: Control HP 14:09:02
A08: Control HP 13:09:02
A03: Brine pressure 13:09:02
TIME
BACK
1.
A
for "Information".
2.
C
for
"Statistics/faults".
3.
A
for "Hours of service"
or
B
for "Average running
time"
or
C
for "No. of starts"
or
D
for
"Error signals". You
can switch between
both displays using the
TIME
and
DATE
keys in the fault
messages menu.
4.
BACK
press to confirm.
Close the programming unit flap.
5592 415GB