Viessmann VITOCAL 300 - Heating Up the DHW Cylinder Once

27
Further settings
Heating up the DHW cylinder once
Using the menu "Top−up DHW cylinder" also enables you to re−heat the DHW
cylinder once at set times, without changing the switching times.
Open the programming unit flap and
press the following keys:
Top−up DHW cylinder
The one−time heating−up of the
DHW is not active. Do you wish
to heat up the boiler just
once?
23
YES
NO
1.
D
for "Top−up DHW cylinder".
2.
A
for "DHW cylinder 1"
or
B
for "DHW cylinder 2".
3. Answer the question in the display
field by pressing
YES
. If you
want to exit this menu without
activating the DHW cylinder
loading, respond to this question
by pressing
NO
.
Close the programming unit flap.
5592 415GB