Viessmann VITOCELL 100-W - Fitting the Thermometer, Thermometer Sensor and Cover Strips

14
Fitting the thermometer, thermometer sensor and cover strips
A
4.
3.
6.
7.
2.
5.
1.
Fig. 10
A
Type plate (self-adhesive)
Fit the thermal insulation jacket evenly around the cyl-
inder body by patting it.
Note
Slide the thermometer sensor into the clamping
bracket at the upper base as far as possible and
tighten the wing nut.
Installation sequence
Fitting the thermal insulation, type SVP (cont.)
5517 175 GB
Installation