10
Central heating
■ Standard room temperature ("Set
room temperature", see page 25):
Never overheat your home. Every
degree of room temperature reduction
saves up to 6 % on your heating bills.
Never set your standard room temper-
ature higher than 20 °C.
■ Time program (see page 26):
Heat your rooms to the standard room
temperature during the day and the
reduced temperature at night. Set the
time program for this.
■ Operating program:
If you do not require central heating,
select one of the following operating
programs:
– "Only DHW" (see page 31):
If you require no heating for your
home in summer, but you need hot
water.
– "Standby mode" (see page 23):
If you don't need to heat your home
and don't need hot water for long
periods.
■ Short absence (see page 29):
Reduce the room temperature if you
are going shopping, for example. For
this, select "Economy mode".
■ Holidays (see page 30):
If you are going away, select the "Hol-
iday program":
The room temperature will be reduced,
and DHW heating will be turned off.
■ Ventilation:
Close the thermostatic valves to ven-
tilate. Open the windows fully for a
brief time.
■ Roller shutters:
Close roller shutters (where installed)
at dusk.
■ Thermostatic valves:
Ensure that thermostatic valves are
properly set.
■ Radiators:
Never cover radiators or thermostatic
valves.
DHW heating
■ DHW circulation pump (see
page 32):
Only activate the DHW circulation
pump for periods in which DHW is reg-
ularly drawn off. Set the time program
for this.
■ DHW consumption:
Consider showering instead of running
a bath. A shower generally uses less
energy than a full bath.
For additional energy saving functions of
the Vitotronic control unit, please contact
your heating contractor.
Introductory information
Tips on saving energy
5592 682 GB
To Next Page
Loading...
Need help?
General
