Viessmann VITOPEND User Manual

33
You do not want to heat DHW or pro-
vide central heating
You do not want to heat DHW, but do
want to provide central heating
For the preferred heating circuit
Standard menu
1. / for the operating program "Stand-
by mode" (frost protection is active)
2. OK
—
For all heating circuits
Extended menu
1.
2. "Heating"
3. / for the required heating circuit if
necessary
4. "Heating program"
5. "Standby mode" (frost protection ac-
tive)
Extended menu
1.
2. "Heating"
3. / for the required heating circuit if
necessary
4. "Heating program"
5. "Heating and DHW"
6. until the menu is displayed
7. "DHW"
8. "Set DHW temperature"
9. Set 10 °C.
DHW heating
Stopping DHW heating
5592 682 GB

Viessmann VITOPEND Specifications

General

Type	Condensing Boiler
Mounting	Wall-mounted
Max flow temperature	85 °C
Fuel Type	Natural Gas / Propane
Efficiency	Up to 98%
Water pressure	Max. 3 bar
Protection class	IPX4