Viessmann VITOPEND User Manual

31
Factory setting: 50 °C
Extended menu
1.
2. "DHW"
3. "Set DHW temperature"
4. Set the required value.
Operating program
Further information can be found
in chapter "Terminology" in the Ap-
pendix.
Setting the operating program for DHW heating
For the preferred heating circuit For all heating circuits
Standard menu
1. / for the operating program:
"Heating and DHW"
Or
"Only DHW"
2. OK
Extended menu
1.
2. "Heating"
3. / for the required heating circuit if
necessary
4. "Heating program"
5. "Heating and DHW"
or
"Only DHW"
For information on the operating pro-
grams, see page 18
Time program
Further information can be found
in chapter "Terminology" in the Ap-
pendix.
Setting the time program for DHW heating
Factory setting: "Automatic"
DHW heating
DHW temperature
5592 682 GB

Viessmann VITOPEND Specifications

General

Type	Condensing Boiler
Mounting	Wall-mounted
Max flow temperature	85 °C
Fuel Type	Natural Gas / Propane
Efficiency	Up to 98%
Water pressure	Max. 3 bar
Protection class	IPX4