20
Example of time phases within the
time program for central heating
Heating
Select with (
HC1
Mo-Fr
?
16:30 - 23:00
u
0 2 4 6 8 10 12 14 16 18 20 22 24
!
05:00 - 08:30
u
Normal
Normal
!
?
■ Time program for "Monday-Friday"
("Mo-Fr")
■
Time phase !:
05:00 to 08:30 h
■
Time phase ?:
16:30 to 23:00 h
In between these time phases the sys-
tem heats to a reduced temperature.
Setting the time program efficiently
If you would like to set a different time
program for just one day of the week,
proceed as follows:
Example: You want to set a different time
program for Monday:
1. Select "Monday-Sunday". Set the
time program.
Heating time program
Monday
Saturday-Sunday
Monday-Friday
Monday-Sunday
ê
ê
ê
ç
HC1
Select with (
Note
The tick is always set at the sections
of the week with identical time pha-
ses.
Factory setting: Same for all days of
the week, therefore "Monday-Sun-
day" is ticked.
2. Select "Monday". Set the time pro-
gram for this.
Operation
Time program
(cont.)
5592 682 GB