Viessmann VITOPEND User Manual

12
14°C
21°C
Programming unit
You can change any settings on your
heating system centrally at the program-
ming unit of the control unit.
If remote control units are installed in
your rooms, you can also adjust the set-
tings at the remote control units.
Remote control operating instruc-
tions
Note
The programming unit can be placed in
a wall mounting base. The wall mounting
base is available as an accessory. Ask
your heating contractor for more infor-
mation.
14°C
21°C
This takes you to the previous step
in the menu or cancels a setting that
has been started.
Cursor keys
Scroll through the menu or adjust
values.
OK Confirms your selection or saves
the setting.
Calls up "Help" (see following
chapter) or additional information
on the selected menu.
Calls up the extended menu.
Operation
Opening the control unit
5592 682 GB

Viessmann VITOPEND Specifications

General

Type	Condensing Boiler
Mounting	Wall-mounted
Max flow temperature	85 °C
Fuel Type	Natural Gas / Propane
Efficiency	Up to 98%
Water pressure	Max. 3 bar
Protection class	IPX4