34
Extended menu
1.
2. "Settings"
3. "Contrast"
4. Set the required contrast.
Setting the display brightness
If you would like the texts in the menu to
be more clearly legible, change the
brightness for "Control".
You can also alter the screen saver
brightness.
Extended menu
1.
2. "Settings"
3. "Brightness"
4. "Control" or "Screen saver"
5. Set the required brightness.
Naming heating circuits
You can name all heating circuits indi-
vidually. The abbreviations "HC1",
"HC2" and "HC3" will be retained.
Extended menu
1.
2. "Settings"
3. "Name for heating circ."
4. "Heating circuit 1", "Heating circuit
2" or "Heating circuit 3"
5. "Change?"
6. You can select the required character
with / .
7. / takes you to the next character.
8. Press OK to accept all entered char-
acters at once and simultaneously exit
this menu.
Note
You can delete the name entered with
"Reset?".
Example:
Name for "Heating circuit 2": Apart-
ment
Further adjustments
Setting the display contrast
5592 682 GB
To Next Page
Loading...
Need help?
General
