25
Further information can be found
in chapter "Terminology" in the Ap-
pendix.
Setting the standard room temperature for central heating
Factory setting: 20 °C
For the preferred heating circuit For all heating circuits
Standard menu
1. / for the required value
2. OK
Extended menu
1.
2. "Heating"
3. / for the required heating circuit if
necessary
4. "Set room temperature"
5. Set the required value.
Setting the reduced room temperature for central heating
Factory setting: 3 °C
Extended menu
1.
2. "Heating"
3. / for the required heating circuit if
necessary
4. "Set reduced room temp"
5. Set the required value.
Central heating to this temperature:
■ Between the time phases for standard
heating mode (see page 26)
■ In the holiday program (see
page 30)
Operating program
Further information can be found
in chapter "Terminology" in the Ap-
pendix.
Central heating
Room temperature
5592 682 GB
To Next Page
Loading...
