37
System setting Settings and values that are reset
"Heating circuit 1", "Heat-
ing circuit 2" or "Heating
circuit 3"
■ Set room temperature: 20 °C
■ Set reduced room temperature
■ Operating program
■ Set DHW temperature
■ Time program for central heating
■ Time program for DHW heating
■ Time program for DHW circulation pump
■ Heating curve slope and level
■ Comfort and energy saving functions ("Party
mode", "Economy mode", "Holiday program")
are deleted.
Note
If heating circuits have been named (see chapter
"Naming heating circuits") the assigned name is re-
tained.
Further adjustments
Restoring factory settings
(cont.)
5592 682 GB
To Next Page
Loading...
