12
Video/Page Up
Switch input source to Composite/
S-Video by sequence.
Perform page up function when
mouse mode is activated.
VGA2
Display COMPUTER IN 2 signal.
ESC/Page Down
Goes back to previous OSD menu.
Perform page down function when
mouse mode is activated.
Enter
Confirmed selections.
Right/ Lock
Activate panel key lock.
Magnify
Magnifies or reduces the projected
picture size.
Volume
Adjust the volume level.
Mute
Cut off the sound temporarily.
Aspect
Select the display aspect ratio.
Using the remote mouse control
The capability of operating your computer
with the remote control gives you more
flexibility when delivering presentations.
1. Connect the projector to your PC or
notebook with a USB cable prior to
using the remote control in place of
your computer’s mouse. See
“Connecting a computer” on page 16
for details.
2. Set the input signal to
COMPUTER IN
1
or
COMPUTER IN 2
.
3. Press
Mouse
on the remote control to
switch from the normal mode to the
mouse mode. An icon appears on the
screen to indicate the activation of the
mouse mode.
4. Perform the desired mouse controls on
your remote control.
To move the cursor on the screen,
press / / / .
To left-click, press .
To right-click, press .
To drag-and-drop, press and hold
Enter, press / / / to
drag. When it is where you want it,
press Enter again.
To operate your display software
program (on a connected PC)
which responds to page up/down
commands (like Microsoft
PowerPoint), press Page Up/Page
Down.
To return to the normal mode,
press Mouse again or other keys
except for the mouse related multi-
function keys.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
