ViewSonic PJD5123 User Manual

EN-37
37
Appendix
LED Indicator Messages
LED Type Color Status Meaning
Power LED Blue Solid Standby mode when green mode is turned on.
Temp/Lamp
LED
Blue/Red Off
Power LED Blue Flash Standby mode when green mode is turned off.
Temp/Lamp
LED
Blue/Red Off
Power LED Blue Solid Powering up
Temp/Lamp
LED
Blue/Red Off
Power LED Blue Solid Normal operation
Temp/Lamp
LED
Blue/Red Off
Power LED Blue Flash Powering down
(The projector needs to cool for 35 seconds after
the projector is turned off.)
Temp/Lamp
LED
Blue/Red Off
Power LED Blue Flash The projector system has some problems with its
fans, so the projector cannot start up.
Temp/Lamp
LED
Blue/Red Flash
Power LED Blue Solid The lamp has reached its end of life and must be
changed soon. The lamp will continue to operate
until it fails. Change the lamp. If the lamp is off,
then the ballast will become malfunction.
Temp/Lamp
LED
Lamp
(Red)
Flash
Power LED Blue Solid 1. Temperature is too high. The lamp will turn off.
The fan motor is cooling the lamp.
Or
2. The cooling process is not complete after the
peojector is shut down and re-started right away.
Temp/Lamp
LED
Tem p
(Blue)
Flash
Power LED Blue Solid The lamp ignition failed. If temperature is too high,
the fans will cool the lamp.
Temp/Lamp
LED
Blue+
Red
Flash

ViewSonic PJD5123 Specifications

General

Matrix size	0.55 \
Number of colors	16.78 million colors
Projection distance	1.2 - 11 m
Vertical scan range	50 - 120 Hz
Horizontal scan range	31 - 100 kHz
Projection technology	DLP
Contrast ratio (typical)	2000:1
Digital gamma correction	Yes
Screen size compatibility	27 - 300 \
Projector native resolution	SVGA (800x600)
Audio input	1
Aspect ratio	16:10
Compatibility	- PC VGA & UXGA - Mac 1600×1200 & 60Hz
Dimensions (WxDxH)	284 x 234 x 82 mm
Focal length range	- mm
Lamp power	180 W
Light source type	Lamp
Service life of light source	6000 h
DVI port	No
Audio (L/R) in	0
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	2
Analog signal format system	PAL B, PAL D, PAL G, PAL H, PAL I, SECAM D/K
RMS rated power	1 W
Product color	Black
Market positioning	Presentation
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	235 W
Noise level	32 dB
Certification	RoHS, CB, CCC, PSB, C-tick, KC, SASO, CE, GOST-R, Ukr, ErP, SVHC list & REACH DoC, UL, FCC (& ICES-003), cUL/ CSA, Argen, NOM
Noise level (economic mode)	30 dB
Operating altitude	0 - 3048 m
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 80 %
Cables included	AC, VGA

Weight and Dimensions

Weight	2600 g
Package weight	3400 g