11
Wall Mounting
Refer to the table below for the standard dimensions for wall mount kits.
Maximum
Loading
Hole pattern
(W x H)
Interface Pad
(W x H x D)
Pad Hole
Screw Specification &
Quantity
14 kg 100 x 100 mm 115 x 115 x 2.6 mm Ø 5 mm
M4 x 10mm
4 pieces
NOTE: Wall mount kits are sold separately.
1. Turn off the device and disconnect all cables.
2. Cover the surface with a soft cloth to protect the screen from scratches or
damage. Then place the device on a flat, stable surface with the screen facing
down.
3. Remove the four (4) screws securing the stand.
4. Carefully, pull down slightly to disengage the hooks. Then remove the stand.
To Next Page
Loading...
