ViewSonic VP2785-4K - Dual Color

61
Dual Color
The monitor comes with a dual color engine to display two different color settings
in PIP or PBP mode. You can set different color presets in both windows (Main
Window and Secondary Window).
Main Window Secondary Window
NOTE: To enable the PIP or PBP mode, refer to the “Multi-picture” section on
page 62.
To configure the Dual Color setting:
1. Open the OSD Menu and select the Setup Menu menu. Then touch the 3 key to
enter the menu.
2. Touch the 1 or 2 key to select Multi-Picture. Then touch the 3 key to enter its
sub-menu.
3. Touch the 1 or 2 key to select Dual Color. Then touch the 3 key to enter its sub-
menu.
4. Touch the 1 or 2 key to select the desired color setting. Then touch the 3 key to
confirm.
Off
Quad Windows
PBP Top-Bottom
PBP Left-Right
PIP
Dual Color
720P60
VP2785-4K
Setup Menu
Color Adjust ViewMode
Manual Image
Adjust
Input
Select
Audio Adjust
Multi-Picture
ECO Mode
DisplayPort 1.2
HDMI 2.0
USB 3.1
DDC/CI
Save As
Backlight Sensor
All Recall
Adobe RGB
sRGB
EBU
DCI-P3
SMPTE-C
REC709
DICOM SIM
I-Phone (sRGB)
CAL 1
CAL 2
CAL 3