ViewSonic VP2785-4K - PIP (Picture-In-Picture)

65
PIP (Picture-in-Picture)
Main Window
Inset Window
To configure the PIP settings:
1. Open the OSD Menu and select the Setup Menu menu. Then touch the 3 key to
enter the menu.
2. Touch the 1 or 2 key to select Multi-Picture. Then touch the 3 key to enter its
sub-menu.
3. Touch the 1 or 2 key to select PIP. Then touch the 3 key to enter its sub-menu.
4. Do the following:
720P60
VP2785-4K
Multi-Picture
ECO Mode
DisplayPort 1.2
HDMI 2.0
USB 3.1
DDC/CI
Save As
Backlight Sensor
All Recall
Off
Quad Windows
PBP Top-Bottom
PBP Left-Right
PIP
Dual Color
PIP Source Select
PIP Position
PIP Size
Swap
Setup Menu
Color Adjust ViewMode
Manual Image
Adjust
Input
Select
Audio Adjust
 To change the input source for the inset window, select PIP Source Select and
touch the 3 key. Then touch the 1 or 2 key to select the desired input source
and touch the 3 key to confirm.
 To adjust the inset window position, select PIP Position and touch the 3 key.
 Touch the 3 key to select PIP H.Position or PIP V.Position.
 Touch the 1 or 2 key to adjust the setting and touch the 3 key to confirm.
 To adjust the inset window size, select PIP Size and touch the 3 key. Then touch
the 1 or 2 key to adjust the setting.
 To swap the two windows, select Swap and touch the 3 key to confirm.