72
Backlight Sensor
With the Backlight Sensor function, the monitor can maintain AdobeRGB, sRGB, and
DICOM brightness stability for extended periods of time.
Typically, monitors take 30 minutes or more for brightness, chromaticity, and tone
characteristics to stabilize; the device can achieve stabilization in a mere three
minutes.
For standard color and native modes, the backlight sensor will automatically adjust
and maintain brightness to meet user defined brightness criteria, such as 120Cd/
m
2
, 160Cd/m
2
, or 230Cd/m
2
.
To configure the backlight sensor function:
1. Open the OSD Menu and select the Setup Menu menu. Then touch the 3 key to
enter the menu.
2. Touch the 1 or 2 key to select Backlight Sensor. Then touch the 3 key to enter its
sub-menu.
3. Touch the 1 or 2 key to select On to enable the function. Then touch the 3 key to
confirm.
720P60
VP2785-4K
Multi-Picture
ECO Mode
DisplayPort 1.2
HDMI 2.0
USB 3.1
DDC/CI
Save As
Backlight Sensor
All Recall
On
Off
Auto Control
User Define
Setup Menu
Color Adjust ViewMode
Manual Image
Adjust
Input
Select
Audio Adjust
To Next Page
Loading...
