70
x,y Adjustment
Using this function, you can adjust x and y values to meet the specific white
temperature color and RGB color space.
To configure the x,y Adjustment settings:
1. Open the OSD Menu and select the Color Adjust menu. Then touch the 3 key to
enter the menu.
2. Touch the 1 or 2 key to select Custom. Then touch the 3 key to enter its sub-
menu.
3. Touch the 1 or 2 key to select x, y Adjustment. Then touch the 3 key to enter its
sub-menu.
4. Touch the 1 or 2 key to select the color you want to change. Then touch the 3 key.
Color Temperature
Gamma
Black Stabilization
Advanced DCR
Gain
Offset
Hue
Saturation
x,y Adjustment
Recall
White
Red
Green
Blue
720P60
VP2785-4K
Setup Menu
Color Adjust ViewMode
Manual Image
Adjust
Input
Select
Audio Adjust
Contrast/Brightness
Color Format
Standard Color
Custom
Color Calibration
To Next Page
Loading...
